Skip to content

Did you know?

You can make us an offer.

The price on the page is not the only way to buy. Tell us what you would like to pay and the studio will reply by email.

  1. 1Choose your piece, metal and diamond.
  2. 2Tell us the price you have in mind.
  3. 3The studio reviews it and replies by email.

Up to 3 offers per piece. No payment details needed to send one.

Lab-grown and natural · Journal

How Are Lab-Grown Diamonds Made?

Lab-grown diamonds grow on a diamond seed by HPHT (heat and pressure) or CVD (carbon gas in a vacuum) over a few weeks, then are cut, polished and graded.

By Steven V., Master Jeweler, 20+ YearsUpdated 4 min read

Square diamond growth plates inside a glowing plasma reactor window
In this article

Quick answer

A lab-grown diamond grows atom by atom on a seed, a thin slice of diamond, using one of two methods:

  • HPHT (high pressure, high temperature): the seed sits in a press with a carbon source and a molten metal flux at roughly 1,300 to 1,600 °C and around 50,000 times atmospheric pressure.
  • CVD (chemical vapor deposition): the seed sits in a vacuum chamber filled with methane and hydrogen. Microwaves turn the gas into a plasma, and carbon settles on the seed in layers.

A gem-quality crystal takes a few weeks to grow. It is then cut, polished and graded like any diamond.

Step 1: choosing the seed

Every lab-grown diamond starts from an existing piece of diamond, because new carbon atoms only line up in the diamond structure when they have a diamond surface to copy. The seed decides a great deal about the finished stone, so growers select it carefully:

  • For CVD, seeds are thin square plates of single-crystal diamond, a few millimeters across, often laser-cut from earlier lab-grown crystals.
  • Orientation: each plate is cut along a specific crystal plane, so the new layers grow evenly.
  • Quality: seeds are checked for strain, cracks and inclusions, because flaws in the seed carry into the new growth. Strain can later show as a gray or brown tint.
  • Preparation: the surface is polished very flat and cleaned before growth, since dust or scratches can start defects.
  • For HPHT, the seed is a small diamond crystal set at the cooler end of the growth capsule.

Step 2: growing the crystal

HPHT CVD
How it works Carbon dissolves in molten metal flux and crystallizes on the seed Carbon from methane gas settles on the seed in a plasma
Conditions About 1,300 to 1,600 °C and around 50,000 times atmospheric pressure High temperature, at very low pressure in a vacuum chamber
Equipment Large hydraulic presses, often cubic presses Microwave plasma reactors, often growing many seeds at once
Rough crystal Blocky, many-sided shape Flat, square block with a dark rim that is cut away
Typical features Tiny metallic flux inclusions; some stones have a faint blue tint from boron Dark carbon pinpoints; some crystals grow with a brownish tint or strain
After growth Usually cut as grown Some crystals are heat-treated to improve color

In an HPHT press, a capsule holds a carbon source such as graphite, a metal flux of iron, nickel or cobalt, and the seed. The flux melts and dissolves the carbon at the hotter end of the capsule, and the carbon crystallizes as diamond on the cooler seed. In a CVD reactor, microwaves break methane and hydrogen into a glowing plasma. Carbon atoms land on the seed and bond in the diamond pattern, while the hydrogen strips away carbon that tries to form graphite.

A gem-quality crystal typically takes a few weeks. Larger crystals need longer, and pushing growth too fast introduces strain and inclusions, so a careful grower trades speed for quality. For comparison, natural diamonds formed roughly 150 kilometers or more below the surface, between about 1 and 3.5 billion years ago. The differences between the two lab methods are compared further in CVD vs HPHT lab diamonds.

Step 3: treatment, cutting and grading

  1. Treatment, if needed. Some CVD crystals are heated after growth, often by HPHT annealing, to remove a brownish tint. The change is permanent, and the grading report notes it. Our article on HPHT annealing explains the process.
  2. Planning. The rough is scanned in 3D, and software maps the cut that gives the best balance of weight, shape and clarity.
  3. Cutting and polishing. Lasers saw and shape the rough, then each facet is polished on a spinning wheel coated with diamond powder, exactly as with mined diamonds. Often around half the rough weight is lost.
  4. Grading. An independent lab such as IGI confirms the stone is laboratory-grown, grades its color, clarity and cut, records the growth method and laser-inscribes the report number on the girdle. See how to read an IGI certificate.
  5. Setting. The finished diamond is set in jewelry by hand.

Does the method affect the diamond you buy?

Not by itself. Both HPHT and CVD produce stones that range from poor to exceptional, and at the clarity grades used in fine jewelry their growth features are not visible to the eye. The finished diamond is real diamond either way; see are lab-grown diamonds real for what that means. What to look at instead:

  • The grades: color, clarity and cut on the report decide how the stone looks.
  • The report comments: growth method and any post-growth treatment are stated there.
  • How it looks in real light: a strained stone can look slightly gray or hazy even with good grades, so judge brightness and transparency on video or in person.

Growing diamonds also takes a lot of electricity for weeks at a time. The environmental footprint depends mainly on how that electricity is generated, so ask for specific, verified claims rather than general labels.

How long from growth to your ring?

Growth takes a few weeks, and treatment, cutting, polishing and grading each add more time. Because of that, a lab-grown diamond is usually finished and graded well before anyone chooses it for a ring, and the wait you experience is for the ring itself. At Diamond Studio, every lab-grown center from 1 to 8 carats comes with its IGI report, and each ring is then made new for you, arriving in about 2 to 2½ weeks. Browse engagement rings to choose a design and a center diamond.

Frequently asked questions

Is HPHT or CVD better?

Neither is better on its own. Both methods produce excellent and poor stones. Judge the finished diamond by its grades, its report comments and how it looks in real light, not by how it was grown.

Can you tell HPHT from CVD by looking?

No. Gem labs identify the method with spectroscopy and fluorescence imaging, and an IGI report states which one was used.

Are lab-grown diamonds treated after growth?

Some are. Certain CVD crystals are heated after growth to remove a brownish tint. The treatment is permanent and does not affect durability, and the grading report notes it.

What carbon is used to grow a diamond?

Ordinary carbon sources: graphite for HPHT and methane gas for CVD. Memorial diamonds grown from carbon extracted from ashes or hair are a separate, specialist service.

Can lab-grown diamonds be grown in fancy colors?

Yes. Small amounts of boron give blue and nitrogen gives yellow, and some pink stones come from treatment after growth. Colorless diamonds need these elements kept out during growth.

Put it into practice

Engagement rings to start from

Every design in any shape, metal and carat, with an IGI-certified lab-grown or GIA-certified natural diamond.

Shop engagement rings

Certification

Certified, every piece

Engagement rings come with an IGI or GIA certificate, and every other piece with a Diamond Studio certificate of authenticity.

Still deciding? Ask the people who make it.

Amit, Shimi and Steven V. answer questions from our Fifth Avenue studio, by message or on a call.

Or follow along

Your bag (0)

Your bag is empty.

Start with a ring, then add the matching band and earrings.

Explore engagement rings