In this article
Quick answer
HPHT annealing is a heat treatment applied after a CVD diamond is grown. The crystal is heated to well over 1,800°C under enormous pressure, which repairs tiny defects in its structure that cause a brown or gray tint. The result is a whiter, more colorless stone.
- Permanent: the color will not change with wear, heat from daily life or cleaning
- No effect on hardness or durability; the stone is still 10 on the Mohs scale
- Disclosed on the grading report as a post-growth treatment
Why CVD diamonds are treated
A CVD diamond grows in a vacuum chamber, where a plasma breaks down a carbon-rich gas such as methane and deposits carbon, layer by layer, onto a thin diamond seed plate. Growth takes weeks. Faster growth is cheaper, but it can lock tiny flaws into the crystal lattice: clusters of missing atoms (vacancies), traces of nitrogen and hydrogen-related defects. These absorb part of the light passing through and give the rough a brownish or grayish body color.
Growers therefore balance speed against quality. Many grow efficiently and then correct the color afterward. Annealing is a routine production step, not a sign of a poor diamond. The causes of tint are covered in more depth in why some lab-grown diamonds look grey or brown, and the two growth methods are compared in CVD vs HPHT lab diamonds.
How HPHT annealing works
- Assess the rough. The grower checks the crystal's color and clarity to decide whether treatment will help.
- Heat under pressure. The crystal goes into a high-pressure press of the same kind used to grow HPHT diamonds. It is heated far above 1,800°C while held at tens of thousands of atmospheres. The pressure keeps it stable as diamond; at that heat without pressure, the surface would begin turning to graphite.
- Defects rearrange. Vacancy clusters break up and some defects migrate or combine into forms that no longer absorb visible light, so the brown fades.
- Cut and grade. The stone is then cut, polished and sent to a lab, which records the treatment.
Some growers use a gentler low-pressure anneal for smaller corrections. Other post-growth treatments exist too, such as irradiation followed by heating to create pink colors; see how colored lab-grown diamonds are made.
As grown vs annealed: does it matter?
| As grown | HPHT annealed | |
|---|---|---|
| Color | As it came out of the reactor | Improved after growth |
| Hardness | 10 | 10 |
| Stability | Permanent | Permanent |
| Report | Noted as as-grown | Notes post-growth treatment |
For many buyers, the final look matters more than the route to it. Judge the diamond on its cut, color and clarity grades, and look at it in daylight. Some people prefer an as-grown stone on principle, which is a fair personal choice.
Natural diamonds are different
The same technique has been used since the late 1990s to whiten some brown natural diamonds. On a natural diamond, the treatment must be disclosed and it lowers value considerably, because rarity is the point. GIA notes it on its reports.
Every Diamond Studio lab-grown center diamond comes with an IGI report; our guide to reading an IGI certificate shows where growth method and treatment appear.
Frequently asked questions
Is an HPHT-annealed CVD diamond still a real diamond?
Yes. Annealing changes only small defects in the crystal. It is still pure carbon in the diamond structure, with the same hardness, refractive index and sparkle.
Will the color of a treated lab-grown diamond fade or change over time?
No. The change is permanent at the atomic level. Normal wear, cleaning and household heat cannot undo it; only another extreme lab process could alter it.
Can a jeweler see HPHT treatment with a loupe?
No. Treatment leaves no visible mark. Labs identify it with spectroscopy and specialized imaging, which is why the grading report is the place to check.
Does annealing affect the price of a lab-grown diamond?
Price is driven mainly by carat, cut, color and clarity. Whether a lab-grown stone is as grown or annealed is a secondary factor for many buyers.



