In this guide
Quick answer
The best wedding band for a marquise ring is usually a curved or chevron (V-shaped) band, because it dips beneath the pointed tip of the stone and lets the two rings sit close.
- Chevron or V band: follows the point for a fitted look.
- Gentle curve: softer, easier to wear on its own.
- Straight band: works when the setting is high enough, with a small gap below the tip.
- Open band: frames the stone without needing an exact fit.
Keep the band slim so it does not shorten the stone's long outline.
A marquise is a long, boat-shaped diamond with a point at each end. Set north-south, along the finger, it makes the hand look longer and slimmer, and its tips often reach past the edge of the ring's shank. That overhang is why a straight band does not always sit flush. Read more about the shape in our marquise diamond guide.
Band options compared
| Band | Fit | Look |
|---|---|---|
| Chevron or V | Close; the dip sits under the tip | Graphic, echoes the point |
| Gentle curve | Close for most settings | Soft, versatile, good alone |
| Contour | Exact; shaped to one ring | Looks like one piece |
| Straight | Small gap under the tip | Classic and simple |
| Open | Ends sit either side of the stone | Modern, frames the stone |
| Marquise-accent | Varies | Leaf or vine patterns, nature-inspired |
For the details of each fit, see our curved band and contour band guides.
Matching the band to the setting direction
- North-south: the classic direction. Choose a V or curve so the band meets the tip.
- East-west: the stone lies across the finger, its points toward the neighboring fingers. It usually sits lower and flatter, so a straight band often fits well.
- Diagonal or toi et moi: a tilted stone suits a gentle curve or an open band, since a V can look off-center.
Protecting the tips
The points are the most vulnerable part of a marquise. Most settings guard them with V-shaped prongs. A band that rubs against those prongs every day can wear them down, so check that the band touches metal, not the stone, and have the prongs inspected about every six months. Choosing the same metal for ring and band keeps wear even.
Width and stacking
Slim bands suit a marquise best. A wide band shortens the long outline that makes the shape special. A favorite stack is two curved bands, one below and one above, which wrap the stone in a pointed frame. For a lighter look, pair one V band with a straight eternity band beyond it.
Marquise is one of the ten shapes on our engagement rings, and the price does not change with the shape at the same carat and grade. Browse wedding bands to pair with it.
Frequently asked questions
Will a straight band work with a marquise ring?
Yes, if the setting is high enough for the band to pass under it. The tip will usually hover over the band with a small gap, which many people like. A low setting needs a curved band.
Which way should a marquise point on the finger?
Traditionally north-south, along the finger, which elongates the hand. East-west is a modern alternative that sits lower and catches less. Diagonal settings are a playful third option.
Can I wear a V band if I upgrade my marquise later?
Only if the new ring has a similar shape and setting height. A V band shaped for a marquise may not suit a round or cushion center, so keep that in mind before choosing a very deep chevron.
Do marquise rings need a guard band?
Not necessarily. A band on each side adds protection to the sides of the setting, but it cannot shield the tips. Sturdy V prongs and regular checks protect the points best.



