In this guide
Quick answer
An open wedding band is a band that does not close at the top: its two ends stop short of each other, often finished with a diamond, and sit on either side of the engagement ring's center stone like a frame.
- Suits: pear, marquise and oval centers, low or wide settings, and halos that a straight band cannot sit flush against.
- Plus: no exact fit needed, and it looks modern on its own.
- Minus: the ends can snag, and the band should never be bent to adjust it.
Open bands, also called open cuff or negative space bands, solve the same problem as curved and contour bands: a setting that will not let a straight band sit close. Instead of bending around the stone, an open band simply leaves room for it. Compare the other approaches in our curved band and contour band guides.
Open band styles
- Parallel ends: the two ends stop level with each other, leaving a straight gap. Clean and architectural.
- Diamond terminals: each end finishes in a single diamond, so the center stone sits between two smaller ones, much like a three-stone look.
- Bypass: the ends pass each other at different heights, creating a swirl around the center stone.
- Open V: the ends angle downward to follow the point of a pear or marquise.
How to choose one
- Measure the gap you need. The opening should be a little wider than the widest point of the engagement ring's setting, so the ends sit beside it rather than under it.
- Match the height. Terminal diamonds should sit lower than the center stone so they frame it instead of competing.
- Check the metal thickness. An open band is less rigid than a closed ring. A sturdier shank in 14K gold or platinum holds its shape better than a very fine one.
- Order your true size. An open band is not meant to be squeezed or stretched to fit.
Pros and cons
| Pros | Cons |
|---|---|
| Works with many settings without a custom fit | Ends can catch on knitwear and hair |
| Frames the center stone and adds width to the look | Less rigid than a closed band |
| Stands alone as a modern fashion ring | Some prefer a closed circle as a symbol of eternity |
Wearing and caring for an open band
Do not bend the band to make it tighter or looser. Each bend weakens the metal and can loosen diamonds near the ends. If the fit changes, have a jeweler resize it properly. Check the terminal stones every few months, since they take more knocks than stones set along a closed band. Rounded or bezel-set ends snag less than prong-set ones.
Browse our wedding bands and fashion rings, or see the wedding band pairing guide for how to match any band to your engagement ring.
Frequently asked questions
Are open rings adjustable?
Only slightly, and only by a jeweler. Bending an open band at home weakens the metal and can loosen diamonds, so it is best to buy it in your correct size.
Do open wedding bands snag?
They can, especially if the ends are set with prongs. Bezel-set or smoothly rounded ends catch far less. Taking the ring off before pulling on fine knitwear helps too.
Can an open band be my only wedding band?
Yes. Some people prefer a closed band because the unbroken circle traditionally stands for eternity, but the meaning of a ring is personal and an open band is just as much a wedding ring.
Can an open band be resized?
Usually, in gold or platinum. The jeweler works on the back of the band, away from the open ends, so the gap at the front stays the same.



