In this guide
Quick answer
I clarity ("Included") is the lowest group on the diamond clarity scale. Inclusions are obvious under 10x magnification and usually visible to the naked eye.
| Grade | What you can expect |
|---|---|
| I1 | Inclusions often visible face up; sparkle usually still good |
| I2 | Clearly visible inclusions; brightness may be reduced |
| I3 | Heavy inclusions that can dull the stone and, in some cases, weaken it |
I grades cost much less, but for an engagement ring most buyers are happier with an eye-clean stone.
Where I clarity sits on the scale
The full clarity scale runs FL, IF, VVS1, VVS2, VS1, VS2, SI1, SI2, I1, I2 and I3. Each step down allows larger, more numerous or better-placed inclusions. The I grades begin where inclusions are no longer subtle. Our diamond clarity chart shows the whole range side by side.
What inclusions look like at this level
In I clarity diamonds you may see dark crystals, large feathers or dense clouds without a loupe. Depending on type and position, they can:
- Show as spots or lines through the table, especially in step cuts.
- Reduce brilliance when a large cloud scatters light, making the stone look hazy.
- Affect durability when a big feather reaches the surface, most of all in I3 stones.
For a closer look at each inclusion type, see the diamond inclusions guide.
Treatments are more common in I grades
Lower clarity stones are the ones most often treated to improve appearance:
- Fracture filling: a glass-like material fills feathers so they are less visible. Fillings can be damaged by heat during jewelry repairs and by some cleaning methods.
- Laser drilling: a fine channel lets a dark inclusion be bleached. The drill hole remains.
Any treatment must be disclosed. Ask for a report from a recognized lab, and be wary of very cheap stones with no report at all.
When I clarity can make sense
- Small accent stones in fashion pieces, where inclusions are too small to notice.
- Rustic or salt-and-pepper styles, where visible inclusions are part of the look.
- A very tight budget for natural diamond size, if you have seen the stone and like it.
Better alternatives for most buyers
| Option | Why it works |
|---|---|
| SI1 or SI2 | Often eye-clean, or close, for a modest step up in price |
| Lab-grown VS | An eye-clean diamond, often for a similar or lower budget than a natural I1 of the same size |
| Slightly smaller, cleaner natural stone | A brighter look that many people prefer to a larger, cloudy one |
Read the SI clarity guide for the grades just above I1, or compare lab-grown vs natural diamonds for more size per budget.
Diamond Studio's center diamond options include E / VS1, E / VVS2 and D / VVS2, all eye-clean, in lab-grown or natural. See our engagement rings.
Frequently asked questions
Is an I1 diamond bad for an engagement ring?
Not necessarily bad, but inclusions are usually visible, and the stone may look less bright. Most people choosing a center diamond prefer an eye-clean SI or VS grade.
Can an I1 diamond be eye-clean?
Occasionally, when the inclusions are small, light in color and near the edge where prongs can cover them. It is uncommon, so view the actual stone before buying.
Do lab-grown diamonds come in I clarity?
They can, but most lab-grown diamonds sold for jewelry are graded higher. Since lab-grown prices are lower, buyers usually choose a cleaner grade at the same budget.
Will a jeweler's cleaning damage an I clarity diamond?
Ordinary cleaning is safe. If the stone is fracture filled, avoid ultrasonic and steam cleaners and tell the jeweler before any repair involving heat.



