In this guide
Quick answer
Gemstone hardness is a stone's resistance to scratching, measured on the Mohs scale from 1 to 10. Diamond is the hardest at 10. For a ring worn every day, choose a stone of 8 or higher; stones below 7 scratch from ordinary dust, which contains quartz.
- 10: diamond, lab-grown or natural
- 9 to 9.25: moissanite, sapphire, ruby
- 7.5 to 8.5: alexandrite, topaz, spinel, beryl
- Below 7: needs protective settings or occasional wear
Mohs hardness chart for jewelry stones
| Stone | Mohs hardness | Daily ring? |
|---|---|---|
| Diamond (lab-grown or natural) | 10 | Excellent |
| Moissanite | 9.25 | Excellent |
| Sapphire and ruby | 9 | Excellent |
| Alexandrite | 8.5 | Very good |
| Topaz and spinel | 8 | Good |
| Cubic zirconia | About 8 to 8.5 | Good at first; dulls over time |
| Emerald, aquamarine, morganite | 7.5 to 8 | Good with a protective setting |
| Tourmaline | 7 to 7.5 | Fair |
| Amethyst and citrine | 7 | Fair |
| Garnet | 6.5 to 7.5 | Fair |
| Peridot | 6.5 to 7 | Occasional wear |
| Tanzanite | 6 to 7 | Occasional wear |
| Moonstone | 6 to 6.5 | Occasional wear |
| Opal | 5.5 to 6.5 | Occasional wear |
| Turquoise | 5 to 6 | Occasional wear |
| Pearl | 2.5 to 4.5 | Special occasions |
How to read the Mohs scale
The Mohs scale ranks minerals by which can scratch which. It is a ranking, not an even ruler. The step from 9 to 10 is far larger than any other step, so diamond is several times harder than sapphire even though they sit one number apart. Lab-grown and natural diamonds are identical at 10.
The number 7 matters most in daily life. Household dust and grit contain quartz, which is 7. Anything softer will slowly gain fine scratches and lose its polish; anything harder resists that wear.
Hardness is not the same as toughness
Hardness is resistance to scratching. Toughness is resistance to chipping and breaking. The two do not always go together:
- Diamond is the hardest stone but has cleavage planes, so a sharp blow to a point or edge can chip it.
- Sapphire and ruby have no cleavage and are very tough, which is why they wear so well.
- Topaz is hard at 8 but has easy cleavage and can split from a knock.
- Emerald is often fractured, so its toughness is lower than its hardness suggests.
- Opal contains water and can crack from heat or sudden temperature change.
What this means when you shop
For an engagement ring or band worn every day, choose a stone at 8 or higher, or protect a softer one with a bezel or halo. See the 8 best stones for engagement rings and our guide to gemstone engagement rings. Softer stones such as opal and pearl shine in earrings and pendants.
Store pieces separately so harder stones do not scratch softer ones; a diamond will scratch every other gem in your jewelry box. Diamond Studio makes diamond jewelry only. If you want the hardest stone for daily wear, browse our engagement rings.
Frequently asked questions
Is moissanite harder than sapphire?
Slightly. Moissanite is 9.25 on the Mohs scale and sapphire is 9. Both resist everyday scratches very well, and only diamond is harder among common jewelry stones.
Can a diamond scratch another diamond?
Yes. Diamond is the only material that reliably scratches diamond, which is why diamond jewelry should be stored so pieces do not rub against each other.
Does a higher Mohs number mean a stone will not break?
No. Mohs measures scratch resistance only. A hard stone can still chip or crack from a blow, depending on its toughness, cleavage and any internal fractures.
Where do metals fall on the Mohs scale?
Gold and platinum are soft compared with most gems, roughly 2.5 to 4.5 depending on alloy. That is why metal shows scratches long before the stones it holds.



