Skip to content

Did you know?

You can make us an offer.

The price on the page is not the only way to buy. Tell us what you would like to pay and the studio will reply by email.

  1. 1Choose your piece, metal and diamond.
  2. 2Tell us the price you have in mind.
  3. 3The studio reviews it and replies by email.

Up to 3 offers per piece. No payment details needed to send one.

Diamond shapes · Guide

Emerald Cut Diamond Guide: Ratio, Clarity and Settings

An emerald cut is a rectangular step cut with long, mirror-like facets. Aim for a 1.30 to 1.50 ratio, an eye-clean VS grade and a setting that shows its lines.

By Steven V., Master Jeweler, 20+ YearsUpdated 2 min read

Emerald Cut Diamond Guide: Ratio, Clarity and Settings
In this guide

Quick answer

An emerald cut is a rectangular diamond with cut corners and long, parallel step facets. Instead of glitter, it shows broad flashes of light and dark, like a hall of mirrors, and its clean lines suit understated, elegant rings.

  • Ratio: 1.30 to 1.50 for the classic rectangle; around 1.40 is a balanced middle
  • Clarity: the open table shows inclusions, so choose an eye-clean VS grade or higher
  • Color: step cuts show tint more than brilliants, so colorless grades look crispest
  • Check: even steps, a centered pattern and no washed-out middle

What makes the emerald cut different

The name comes from the cut long used on emeralds, a stepped rectangle that suited those gems. On a diamond, it creates a very different effect from a round. Light reflects off long, flat facets in wide planes, so you see crisp bands of brightness and contrast rather than pinpoint sparkle. Compare the two styles in step cut vs brilliant cut diamonds.

The emerald cut is linked with classic glamour. Grace Kelly's engagement ring featured an emerald-cut Cartier diamond, and the shape remains a favorite for people who prefer clean architecture to dazzle.

How to choose an emerald cut

Factor What to look for
Ratio 1.30 to 1.50. Lower looks squarer and more compact; higher looks long and slender. See the diamond ratio guide.
Clarity The large table works like a window. Choose a stone that is clean to the eye, ideally confirmed by video. VVS vs VS diamonds explains the grades.
Color Body color shows through the open facets and at the corners, so colorless grades suit white gold best.
Symmetry The steps should be evenly spaced, parallel and centered on the table.
Light return Avoid a pale, see-through center, called a window, which comes from a pavilion cut too shallow.

Size on the hand

An emerald cut's length makes it look generous on the finger and slims the hand. Because step cuts lack the busy sparkle that blurs edges, the outline also reads clearly from a distance. A slightly longer ratio emphasizes size; a squarer one shows off the steps.

Settings that suit the emerald cut

  • Four-prong solitaire: prongs at each cut corner protect them and frame the rectangle.
  • Three-stone: tapered baguettes or trapezoids continue the step-cut lines; pears or rounds soften them. Browse three stone engagement rings.
  • Hidden halo: adds sparkle from the side without changing the clean top view.
  • East-west: set horizontally across the finger for a modern twist.

Mistakes to avoid

  • Choosing clarity from the report alone. Location matters: an inclusion under the table is far more visible than one near the edge.
  • Confusing flash with dullness. Broad, calm flashes are the style, but a stone that looks gray or glassy in video is poorly cut.
  • Going too long. Ratios well above 1.50 can look narrow, especially in smaller sizes.

Emerald cuts at Diamond Studio

The emerald cut is one of our ten center diamond shapes, and the shape does not change the price at the same carat and grade. Lab-grown centers come from 1 to 8 carats with an IGI report; natural centers from 1 to 3 carats with a GIA report. For a square version of the look, see the Asscher cut diamond guide, or start with engagement rings.

Frequently asked questions

Do emerald cut diamonds sparkle?

Yes, but differently from a round. They give broad, mirror-like flashes and strong contrast rather than many tiny sparkles, a look often described as calm and elegant.

Does an emerald cut diamond look bigger than a round?

It often looks larger on the hand because of its length and its large, open table. Exact face-up size depends on the cut, so compare millimeter measurements.

Are emerald cut diamonds durable?

Yes. Diamond is the hardest gem, and the cut corners reduce the risk of chipping. Prongs over the corners add extra protection for everyday wear.

Is an emerald cut a good choice for a large carat weight?

It is a striking choice in larger sizes, where the step pattern is easier to see. Clarity matters more as the diamond grows, since the open table shows inclusions.

Put it into practice

Engagement rings to start from

Every design in any shape, metal and carat, with an IGI-certified lab-grown or GIA-certified natural diamond.

Shop engagement rings

Certification

Certified, every piece

Engagement rings come with an IGI or GIA certificate, and every other piece with a Diamond Studio certificate of authenticity.

Still deciding? Ask the people who make it.

Amit, Shimi and Steven V. answer questions from our Fifth Avenue studio, by message or on a call.

Or follow along

Your bag (0)

Your bag is empty.

Start with a ring, then add the matching band and earrings.

Explore engagement rings