In this guide
Quick answer
A solitaire engagement ring works with almost every wedding band, so the choice is about balance and sparkle.
- Plain band: timeless and understated; the center diamond stays the star.
- Pavé or half-eternity band: adds sparkle across the top of the finger.
- Full eternity band: diamonds all the way around for maximum brilliance.
- Matching band: the same width and profile as the solitaire's shank, for a seamless pair.
Choose a band about as wide as the solitaire's shank, or slightly slimmer, in the same metal.
A solitaire is a ring with a single center stone and no halo or side stones. Its simplicity is what makes it so easy to pair, and why it is often the base of a wedding stack that grows over time. For setting styles and how to choose the stone, see our solitaire engagement ring guide.
Plain shank or pavé shank
- Plain-shank solitaire: a diamond band adds contrast and sparkle, while a plain band gives a classic, minimal pair. Both look intentional.
- Pavé-shank solitaire: a matching pavé band, with the same diamond size and setting style, makes the two rings read as one. A plain band next to it looks deliberately contrasted.
Width and proportion
The band should usually match the solitaire's shank width or be a little slimmer. A band that is much wider can make the center diamond look smaller. As a starting point:
| Center diamond | Approx. round diameter | Band width that tends to balance |
|---|---|---|
| 1 ct | 6.4 mm | About 1.5 to 2 mm |
| 2 ct | 8.1 mm | About 2 to 2.5 mm |
| 3 ct and above | 9.3 mm or more | About 2 to 3 mm |
These are style guides, not rules. Long fingers and bold tastes carry wider bands well. Our wedding band width guide goes into more detail.
Will it sit flush?
Most solitaires sit flush with a straight band, because the setting rises above the shank. Check the side profile if your ring has:
- A low-set or bezel head, which may sit at the same height as the band and push it away.
- A hidden halo, which widens the base beneath the stone.
- A cathedral setting, where the arches usually leave room underneath, but can be wide at the base.
If a gap appears, a slim curved band closes it, or you can simply enjoy the small space between the rings.
Stacking ideas for a solitaire
- One plain band below for a classic look.
- A pavé band below and a plain band above for contrast.
- Two slim pavé bands framing the solitaire.
- An eternity band added later for an anniversary.
Browse solitaire engagement rings and wedding bands, available in 14K and 18K white, yellow and rose gold, with bands also in platinum.
Frequently asked questions
Plain or diamond band with a solitaire?
Both suit a solitaire. A plain band keeps the look classic and low maintenance. A diamond band adds sparkle and makes the stack feel fuller. Many people start with one and add the other later.
Can a full eternity band be resized?
Usually not by much, because diamonds run all the way around and leave no plain metal to cut. Order a full eternity band in a size you are confident in, or choose a half-eternity band if your size may change.
Should the band be the same metal as my solitaire?
For a matched set, yes. The same metal and karat also wear at the same rate when the rings rub together. Mixed metals can look great if the contrast is intentional.
Does a solitaire need a band on both sides?
No. A single band is the traditional pairing. A second band above the solitaire adds sparkle and stops the ring from tipping, but it is purely a style choice.



