Skip to content

Did you know?

You can make us an offer.

The price on the page is not the only way to buy. Tell us what you would like to pay and the studio will reply by email.

  1. 1Choose your piece, metal and diamond.
  2. 2Tell us the price you have in mind.
  3. 3The studio reviews it and replies by email.

Up to 3 offers per piece. No payment details needed to send one.

Ring size and fit · Guide

Ring Size Guide

Measure a ring that fits, or your finger, in millimeters and match it to the US size chart. Includes half sizes, printable sizer tips and fit advice.

By Steven V., Master Jeweler, 20+ YearsUpdated 4 min read

Ring Size Guide
In this guide

Quick answer

Measure the inside diameter of a ring that already fits, or the circumference of your finger, in millimeters, then match it to the US size chart below. Measure at the end of the day when your hands are warm, make sure the ring will pass your knuckle, and go up half a size for bands wider than about 6 mm. Between two sizes, choose the larger. For reference, a US size 6 is 16.5 mm across and a size 7 is 17.3 mm.

Ordering the right size the first time saves a resize and keeps a ring comfortable for years. Measure with one of the methods below, check the result against the chart, and use the fit tips to decide between two sizes. If you can, measure two or three times on different days and compare.

US ring size chart

Inside diameter and circumference for each full US size from 3 to 13, with half sizes from 4.5 to 9.5. Each half size adds about 0.4 mm to the diameter and about 1.3 mm to the circumference.

US size Inside diameter Circumference
3 14.1 mm 44.2 mm
4 14.9 mm 46.8 mm
4.5 15.3 mm 48.0 mm
5 15.7 mm 49.3 mm
5.5 16.1 mm 50.6 mm
6 16.5 mm 51.9 mm
6.5 16.9 mm 53.1 mm
7 17.3 mm 54.4 mm
7.5 17.7 mm 55.7 mm
8 18.1 mm 57.0 mm
8.5 18.5 mm 58.2 mm
9 18.9 mm 59.5 mm
9.5 19.4 mm 60.8 mm
10 19.8 mm 62.1 mm
11 20.6 mm 64.6 mm
12 21.4 mm 67.2 mm
13 22.2 mm 69.7 mm

In much of Europe the ring size is the inside circumference in millimeters, so the circumference column, rounded, gives the European equivalent. For men's rings and wider bands, see our men's ring size guide.

How to measure your ring size at home

  1. Measure a ring that fits. Choose a ring worn on the same finger, lay it flat on a ruler and measure the inside diameter from inner edge to inner edge, through the center. A thin band gives the most accurate reading.
  2. Wrap your finger. Wrap a thin strip of paper or non-stretch string around the base of the finger, snug but not tight, mark where it overlaps and measure the length in millimeters. That is the circumference. Slide the loop over your knuckle to check that it passes.
  3. Use a printable ring sizer. Our printable ring sizer lets you measure your finger, or a ring you already own, before you order.

Using a printable ring sizer

  • Print at 100% or "actual size". "Fit to page" shrinks the sizer and gives the wrong result.
  • Check the printed scale with a ruler before measuring. If it is off by even a millimeter, adjust the print settings and print again.
  • With a sizing strip, cut it out, wrap it around the base of your finger with the numbers facing out and read the size where the end meets the scale.
  • With sizing circles, lay a ring on the page and choose the circle whose outline sits just inside the ring's inner edge. If it falls between two circles, choose the larger.

A jeweler's metal sizing rings are the most accurate method of all, because they feel like a real band. If you are near a jeweler, ask to try them on; it takes a minute.

Getting the fit right

A ring that fits slides over the knuckle with a little resistance and sits without spinning freely. These factors change the size you need:

  • Time and temperature. Fingers shrink in the cold and swell in heat, after exercise and late in the day. Measure when your hands are warm, ideally in the evening.
  • Knuckles. If your knuckle is much wider than the base of the finger, size for the knuckle so the ring slides on, and ask about sizing beads to stop it from spinning.
  • Band width. Wide bands fit more snugly than thin ones. Go up about half a size for bands wider than about 6 mm; our wedding band width guide explains why.
  • Comfort fit. A band with a rounded inside can feel slightly looser than a flat one of the same size, so measure with a similar profile if you can.
  • Dominant hand. Fingers on the dominant hand are often slightly larger, so measure the hand the ring will be worn on.
  • Stacking. An engagement ring and a wedding band worn together cover more of the finger and can feel snugger than either alone. Try a similar combined width before you decide.
  • Eternity bands. Full eternity bands usually cannot be resized, because the diamonds run all the way around, so confirm the size carefully before ordering one.

If a ring turns out loose, there are simple fixes; see what to do if your ring is too big.

Sizing for a surprise, and sizing at Diamond Studio

Our rings come in US sizes 4 to 10, half sizes included. Buying for a surprise proposal? Choose "Order now and confirm it with us later" and confirm the size with the studio once you know it. Our guide to finding a ring size secretly has discreet ways to find out, such as borrowing a ring your partner wears on that finger and measuring it.

If a ring needs adjusting after it arrives, it can be sent back to us for resizing, although a local jeweler is often quicker. Plain and many pavé rings can be resized by a size or two. Every piece is made new to order, arrives in about 2 to 2½ weeks with free insured shipping, and is covered by our 60-day returns. Browse our engagement rings.

Frequently asked questions

Should I size up or down if I am between sizes?

Size up. A slightly loose ring can be fitted with sizing beads; a tight one is uncomfortable and harder to take off.

How accurate is a printable ring sizer?

Accurate enough to order from, as long as it prints at true size and you check it with a ruler. Paper can stretch or slip, so measure two or three times and compare with a ring that fits.

Can a ring be resized later?

Plain and many pavé rings can be resized by a size or two. Full eternity bands and some intricate designs cannot, or only within narrow limits.

How should a ring feel when it fits?

It should slide over the knuckle with slight resistance, stay put when you shake your hand and leave no deep mark when you take it off. If it spins freely or needs soap to come off, the size is wrong.

Does ring size change over time?

Yes. Weight changes, pregnancy, heat and age can all change finger size, sometimes by half a size or more, so check the fit if a ring starts to feel tight or loose.

Put it into practice

Engagement rings to start from

Choose a setting, then the diamond’s shape, carat and lab-grown or natural origin.

Shop engagement rings

Certification

Certified, every piece

Engagement rings come with an IGI or GIA certificate, and every other piece with a Diamond Studio certificate of authenticity.

Still deciding? Ask the people who make it.

Amit, Shimi and Steven V. answer questions from our Fifth Avenue studio, by message or on a call.

Or follow along

Your bag (0)

Your bag is empty.

Start with a ring, then add the matching band and earrings.

Explore engagement rings