In this guide
Quick answer
An old mine cut is an antique diamond cut with a softly squared, cushion-like outline, cut by hand from the 1700s through the late 1800s. It is the ancestor of today's round brilliant.
- High crown and small table: broad, chunky flashes of light.
- Deep pavilion and open culet: a small round "window" often visible in the center.
- Slightly irregular facets: every stone is a little different.
- Soft, warm glow: cut to shine by candlelight rather than electric light.
Where the name comes from
Before the large South African finds of the 1870s, most diamonds came from the "old mines" of India and, from the 1700s, Brazil. Cutters shaped this rough by hand, following the crystal to save as much weight as possible. The result was a squarish stone with rounded corners and 58 facets, which jewelers later called the old mine cut. As cutting tools improved, it gave way to the rounder old European cut and then, in the 20th century, to the modern round brilliant. Our article on antique diamond cuts traces that history.
How it looks compared with modern cuts
| Old mine cut | Modern cushion | |
|---|---|---|
| Outline | Squarish to almost round, slightly irregular | Even square or rectangle with rounded corners |
| Crown | Tall | Lower |
| Table | Small | Larger |
| Culet | Open, often visible | Pointed or very small |
| Sparkle | Larger, slower flashes; soft glow | Brighter, more fragmented sparkle |
Many people love old mine cuts for exactly this character. They tend to look less bright than a modern stone in shop lighting, but rich and romantic in daylight and candlelight.
What to check when buying one
- Condition. Antique stones have often been worn for generations. Look for chips along the girdle, worn facet edges and abrasions.
- Recutting. Some old mine cuts have been recut into modern shapes over the years. Others have been partially recut, which can change their character.
- Color. Many antique stones show a warmer color, as cutters prioritized weight. If you like that glow, see our warm diamonds guide.
- Reports. GIA gives cut grades only to standard round brilliants, so judge an old mine cut by eye, video and proportions instead.
- Reproductions. New diamonds, including lab-grown ones, are now cut in old mine style. A good seller states clearly whether a stone is antique or newly cut.
Getting the look at Diamond Studio
Diamond Studio does not offer old mine cut center stones. If you love their soft, cushiony outline, the closest of our ten shapes is the cushion, available with a lab-grown or natural diamond. Set it in one of our vintage engagement rings with milgrain or engraved details for an antique feel. Read our cushion cut diamond guide, or talk to us through our contact page.
Frequently asked questions
Is an old mine cut the same as an old European cut?
No. An old mine cut has a squarish, cushion-like outline. The old European cut came later, from the late 1800s, with a round outline, and led to the modern round brilliant.
Are old mine cut diamonds valuable?
Value depends on size, color, clarity and condition, like any diamond. Fine antique examples are sought after by collectors, while worn or heavily included stones are valued more modestly.
Why does an old mine cut have a hole in the middle?
That circle is the open culet, a small flat facet at the bottom of the stone. Antique cutters added it to protect the point, and it shows through the table as a small window.
Can an old mine cut diamond be set in a new ring?
Yes. Many people reset heirloom old mine cuts in new settings. Because each stone is irregular, the setting should be made or adjusted to fit its exact measurements.



