Skip to content

Did you know?

You can make us an offer.

The price on the page is not the only way to buy. Tell us what you would like to pay and the studio will reply by email.

  1. 1Choose your piece, metal and diamond.
  2. 2Tell us the price you have in mind.
  3. 3The studio reviews it and replies by email.

Up to 3 offers per piece. No payment details needed to send one.

Earrings · Journal

How to Choose Lab-Grown Diamond Stud Earrings

Choose stud size by total carat weight, insist on a well-matched pair, pick eye-clean colorless diamonds and a secure setting and back. Sizes in mm inside.

By Steven V., Master Jeweler, 20+ YearsUpdated 4 min read

A pair of round diamond stud earrings on a cream velvet earring card
In this article

Quick answer

Choose diamond studs in four steps:

  1. Size: studs are sold by total carat weight (ctw) for the pair, so 1 ctw means two 0.5 carat diamonds, each about 5.1 mm across in a round.
  2. Matching: the two diamonds should match in size, color and sparkle.
  3. Quality: well cut, colorless and eye-clean diamonds keep studs bright, especially in white metal.
  4. Setting and backs: four prongs show the most diamond; six prongs or a bezel hold it more securely; screw backs are the most secure for larger studs.

Diamond studs are the earrings many people wear every day for years, so small decisions add up: the right size for the ear, a pair that truly matches, and a setting that stays put. Lab-grown diamonds make each of those choices easier, because the same budget reaches a larger size or a higher grade.

Stud earring size guide

Total weight Each diamond Round diameter How it reads
0.5 ctw 0.25 ct about 4.1 mm Subtle and easy to wear
1 ctw 0.5 ct about 5.1 mm Classic everyday size
1.5 ctw 0.75 ct about 5.8 mm Clearly visible across a room
2 ctw 1 ct about 6.4 mm A noticeable step up
3 ctw 1.5 ct about 7.3 mm Statement studs
4 ctw 2 ct about 8.1 mm Bold, for evenings and occasions
6 ctw 3 ct about 9.3 mm Red-carpet scale

Always check whether a size is quoted per earring or for the pair: "1 ctw" and "1 carat each" are very different earrings. Diameter grows more slowly than weight, so doubling the carat weight does not double the width; going from 1 ctw to 2 ctw takes each diamond from about 5.1 mm to about 6.4 mm. Earlobe size matters as well; on a small lobe, a 6 to 7 mm diamond already fills much of the space.

Shape changes the look too. Round studs give the most sparkle and the classic look. Princess studs look crisp and modern. Oval and pear studs spread their weight over a longer outline and can look larger face-up than a round of the same weight, while cushion studs feel soft and romantic. Emerald and Asscher studs show clean, mirror-like facets, but they reveal inclusions more readily, so choose a higher clarity for them.

Diamond quality for studs

  • Cut: the biggest driver of sparkle. A well-cut stud catches light even at a distance; a poorly cut one looks glassy or dark.
  • Color: colorless diamonds (D to F) look crisp and icy in white gold and platinum. Earrings are seen from further away than a ring, so a hint of warmth shows less, especially in yellow or rose gold.
  • Clarity: studs only need to be eye-clean. Inclusions that are invisible at arm's length do not change how earrings look on the ear.
  • Matching: the two diamonds should be close in diameter, color and cut, so neither looks brighter or larger. A good pair is chosen together, not as two separate stones.

For a refresher on what each grade means, see the 4 Cs of diamonds.

Common mistakes

  • Comparing a per-earring weight with a total weight.
  • Paying for a clarity grade that cannot be seen on the ear, instead of a better cut or a larger size.
  • Choosing large studs with light push backs that cannot hold their weight.
  • Buying two single studs that do not quite match.

Settings and backs

Setting Look Security
Four-prong Shows the most diamond; a round looks slightly square Good
Six-prong Keeps a round looking round Very good
Three-prong (martini) Sits close to the ear in a cone-shaped setting Good
Basket Prongs joined by a band of metal underneath Very good
Bezel A smooth rim of metal; modern Excellent

Backs matter as much as the setting. Push backs, also called butterfly backs, slide on and off quickly and suit smaller studs. Screw backs thread onto the post and are the most secure choice for larger studs or for anyone who has lost an earring before. Locking push backs fall in between. Heavier studs can tilt forward on the lobe; a setting that sits close to the ear and a backing that supports the lobe help them face forward. More detail is in our earring backing guide.

Why lab-grown suits studs

Lab-grown diamonds are real diamonds, with the same carbon crystal, hardness and sparkle as mined ones. Thermal diamond testers read them as diamond, though some HPHT-grown stones can confuse electrical-conductivity testers. Because a matched pair costs much less in lab-grown diamonds, the same budget buys a larger size or a higher grade. Some people still prefer natural diamonds for their rarity and origin; that is a personal choice, and our guide to lab-grown vs natural diamonds sets out the differences.

Buying and caring for studs at Diamond Studio

Diamond Studio earrings come with lab-grown or natural diamonds in 14K or 18K white, yellow or rose gold or platinum. Each page lists the total carat weight, the grades and the type of back, and every pair comes with a Diamond Studio certificate of authenticity; our studio grades the diamonds to GIA standards. Every pair is made new to order and arrives in about 2 to 2½ weeks, with free insured shipping and 60-day returns. Lab-grown diamonds carry our lifetime warranty against cracking, damage and clouding while in your possession, and for loss or theft we recommend separate jewelry insurance.

To keep studs secure, check that the backs grip firmly every few weeks, and replace a back that has loosened. Clean them with warm water, mild soap and a soft brush, paying attention to the underside of the setting, where lotion and hair products collect. Browse earrings.

Frequently asked questions

What size diamond studs should I get?

Around 0.5 to 1 ctw is a common everyday size; 1.5 to 2 ctw makes more of a statement. Consider the wearer's earlobes, style and the earrings they already wear.

Are lab-grown diamond studs real diamonds?

Yes. Lab-grown diamonds are real diamonds, with the same chemistry, hardness and sparkle as mined ones. Only specialist equipment can tell them apart.

What does ctw mean on earrings?

Carat total weight: the combined weight of both diamonds in the pair. A 2 ctw pair has two diamonds of about 1 carat each.

Can I sleep in diamond stud earrings?

You can, but pillows can loosen push backs and bend posts over time. Many people take studs off at night, or choose screw backs if they prefer to leave them in.

Do diamond studs need to be the same size?

Yes, for a classic pair. Matched studs are cut and selected together so they look identical on the ear, even when their weights differ by a few hundredths of a carat.

Put it into practice

Fine jewelry to wear every day

Earrings, necklaces and bracelets, each with a Diamond Studio certificate of authenticity.

Shop fine jewelry

Still deciding? Ask the people who make it.

Amit, Shimi and Steven V. answer questions from our Fifth Avenue studio, by message or on a call.

Or follow along

Your bag (0)

Your bag is empty.

Start with a ring, then add the matching band and earrings.

Explore engagement rings