In this guide
Quick answer
Diamond inclusions are tiny features inside the stone that formed as it grew, such as mineral crystals, small fractures called feathers, and clusters of pinpoints called clouds. Nearly every diamond has some. Whether one matters depends on four things:
- Size: larger inclusions lower the clarity grade and are easier to see.
- Color: dark inclusions show more than white or clear ones.
- Location: under the table is most visible; near the edge is easier to hide.
- Type: a feather reaching the surface can affect durability; a pinpoint does not.
Common types of inclusions
| Inclusion | What it is | How much it matters |
|---|---|---|
| Pinpoint | A tiny dot, usually white | Rarely visible; common in VS and VVS stones |
| Cloud | A group of pinpoints | Harmless if small; a large cloud can make a stone hazy |
| Crystal | A mineral grain trapped inside, sometimes another diamond | Clear ones hide well; dark ones show |
| Feather | A small internal fracture | Usually fine; check large ones that reach the surface |
| Needle | A thin, long crystal | Usually minor |
| Twinning wisp | Streaks formed where the crystal changed direction while growing | Often minor; can reduce transparency if extensive |
| Cavity or chip | An opening or break at the surface | Can trap dirt; avoid in exposed areas |
Surface marks such as scratches, nicks and polish lines are called blemishes. They count toward clarity too, but much less.
Inclusions in lab-grown diamonds
Lab-grown diamonds have inclusions of their own. HPHT stones can contain small metallic particles from the growth process, and CVD stones can show dark specks of non-diamond carbon or faint growth lines. IGI grades them on the same clarity scale it uses for natural diamonds. Our article on lab-grown inclusions explains how to spot them.
Where an inclusion sits
Placement can matter as much as the grade. An inclusion directly under the table is seen through the largest, flattest window of the stone. One near the girdle may be covered by a prong. Brilliant cuts such as round, oval and radiant break up light into sparkle and hide small inclusions well. Step cuts such as emerald and Asscher have large open facets that show them clearly, so they deserve a higher clarity.
How to read a clarity plot
A GIA or IGI report includes a diagram of the diamond with symbols for each inclusion: red for internal features and green for surface ones. The report also lists the key characteristics in order of importance. The first item on that list is the one that set the grade. See our diamond clarity chart for what each grade allows.
Inclusions to look at twice
- A long feather that breaks the surface, especially near the girdle or a corner.
- A dark crystal under the table.
- A large cloud in an SI stone that might reduce brightness.
- Any inclusion near the point of a pear, marquise, heart or princess, where the stone is thinnest.
Diamond Studio's center diamond options include E / VS1, E / VVS2 and D / VVS2, grades where inclusions are typically not visible without magnification. Each comes with an IGI or GIA report. Browse engagement rings.
Frequently asked questions
Can inclusions make a diamond crack?
Rarely. Diamond is very tough, but a large feather that reaches the surface can be a weak point if the stone takes a hard knock in that spot. Most inclusions have no effect on durability.
Can a jeweler remove inclusions?
Some dark inclusions can be lightened by laser drilling, and fractures can be filled. Both are treatments that must be disclosed and lower the value. Untreated stones are the safer buy.
Do inclusions get worse over time?
No. Inclusions are fixed inside the crystal. A hard knock or strong heat can extend a surface-reaching feather.
What does eye-clean mean?
An eye-clean diamond shows no inclusions when viewed face up with the naked eye at a normal distance. Most VS stones and many SI1 stones are eye-clean.



