Skip to content

Did you know?

You can make us an offer.

The price on the page is not the only way to buy. Tell us what you would like to pay and the studio will reply by email.

  1. 1Choose your piece, metal and diamond.
  2. 2Tell us the price you have in mind.
  3. 3The studio reviews it and replies by email.

Up to 3 offers per piece. No payment details needed to send one.

Lab-grown and natural · Guide

CVD vs HPHT Lab-Grown Diamonds: Differences and How to Choose

CVD and HPHT both grow real diamonds; they differ in rough shape, typical inclusions and tints. Judge each stone on its grades rather than on the method.

By Steven V., Master Jeweler, 20+ YearsUpdated 2 min read

CVD vs HPHT Lab-Grown Diamonds: Differences and How to Choose
In this guide

Quick answer

CVD HPHT
How it grows Carbon from gas builds up layer by layer on a seed plate Carbon dissolved in molten metal crystallizes on a seed under huge pressure
Typical tint Brownish, often removed by annealing Faint blue or gray from boron
Typical inclusions Dark pinpoints, growth lines Small metallic particles

Both methods produce real diamonds with identical hardness and sparkle. Neither is better overall; a well graded stone from either method looks the same on the hand.

How each method works

CVD: chemical vapor deposition

A thin diamond seed plate sits in a vacuum chamber. A carbon-rich gas, usually methane mixed with hydrogen, is energized into a glowing plasma, and carbon atoms settle onto the seed, adding the crystal one layer at a time over several weeks. Growth happens at low pressure. Gem-quality CVD became commercially important much later than HPHT, from the 2000s onward.

HPHT: high pressure, high temperature

HPHT recreates the conditions deep in the earth. Inside a press, a small seed sits in a molten metal solvent at tens of thousands of atmospheres and temperatures above 1,300°C. Carbon dissolves in the metal and crystallizes onto the seed. This is the older method, dating to the first successful diamond growth in the 1950s.

For the full process, see how lab-grown diamonds are made.

Side-by-side differences

CVD HPHT
Rough shape Flat, squarish block Rounded, many-sided crystal
Shapes it suits Emerald, radiant, princess, cushion Round brilliant
Diamond type Usually Type IIa Usually Type IIa when colorless; may hold traces of boron
Common tint Brown or gray from fast growth Faint blue or gray from boron
Post-growth treatment Often annealed to improve color Less often needed
Typical inclusions Dark carbon pinpoints, growth striations Metallic flux inclusions
Under UV light Sometimes orange or red fluorescence Stronger under short-wave UV, often with an afterglow

Both methods can produce a diamond of any shape; the table shows tendencies, not rules. The tints are explained in boron blue tint in HPHT diamonds and HPHT annealing of CVD diamonds.

Which should you choose?

Choose the stone, not the method. Two diamonds with the same cut, color and clarity grades look alike regardless of how they grew. A few personal preferences can tip the balance:

  • If you want an untreated stone, look for a report marked as grown. These are more common among HPHT stones, though as-grown CVD stones exist.
  • If you dislike a cool cast, check HPHT stones in daylight for boron tint.
  • If you dislike any warmth or haze, check CVD stones in daylight for residual brown or graining.

Our lab-grown diamond buying guide covers the grades that matter most.

How to tell which method was used

Not by eye, and not with a loupe. The growth method is identified by gem labs using spectroscopy and UV imaging, which reveals the layered pattern of CVD growth or the geometric sectors of HPHT growth. The easiest check is the grading report: IGI reports state the growth method. Our guide to reading an IGI certificate shows where. Every Diamond Studio lab-grown center from 1 to 8 carats comes with an IGI report; browse engagement rings.

Frequently asked questions

Is a CVD or HPHT diamond more expensive?

Price follows carat, cut, color and clarity far more than the growth method. Two stones with the same grades from different methods are usually priced alike.

Can a magnet tell whether a diamond is HPHT grown?

Sometimes. HPHT stones with larger metallic inclusions can be drawn to a strong magnet, but many are not. It is a curiosity, not a reliable test; the grading report is.

Do CVD and HPHT diamonds sparkle differently?

No. They have the same refractive index and dispersion. Sparkle depends on how well the stone is cut, not on how the crystal grew.

Are CVD and HPHT diamonds equally durable?

Yes. Both are 10 on the Mohs scale, with the same crystal structure and toughness as a natural diamond, and both suit everyday wear.

Put it into practice

Engagement rings to start from

Every design in any shape, metal and carat, with an IGI-certified lab-grown or GIA-certified natural diamond.

Shop engagement rings

Certification

Certified, every piece

Engagement rings come with an IGI or GIA certificate, and every other piece with a Diamond Studio certificate of authenticity.

Still deciding? Ask the people who make it.

Amit, Shimi and Steven V. answer questions from our Fifth Avenue studio, by message or on a call.

Or follow along

Your bag (0)

Your bag is empty.

Start with a ring, then add the matching band and earrings.

Explore engagement rings