Skip to content

Did you know?

You can make us an offer.

The price on the page is not the only way to buy. Tell us what you would like to pay and the studio will reply by email.

  1. 1Choose your piece, metal and diamond.
  2. 2Tell us the price you have in mind.
  3. 3The studio reviews it and replies by email.

Up to 3 offers per piece. No payment details needed to send one.

Pairing and stacking · Guide

Contour Wedding Band Guide

A contour wedding band is shaped to follow the outline of an engagement ring so the two sit together with no gap. When you need one, styles and how to get the fit right.

By Steven V., Master Jeweler, 20+ YearsUpdated 3 min read

Contour Wedding Band Guide
In this guide

Quick answer

A contour wedding band is a band shaped to trace the outline of a specific engagement ring, so the two rings sit flush with no gap between them.

You usually need one when the engagement ring's setting sits low or spreads wide, for example:

  • a low bezel or basket setting
  • a halo that sits close to the finger
  • a marquise or pear whose tips overhang the band

The trade-off: a contour band is made for one ring, and it can look unfinished worn on its own.

A straight band only sits flush against an engagement ring when the ring's setting clears the band. When it does not, the band is pushed away, leaving a gap. A contour band solves this by curving or notching around the setting. It differs from a curved wedding band, which has a general arc that suits many rings; a contour band follows the shape of one ring closely.

Common contour styles

  • Notched: a small cutout in the middle makes room for the head of the setting. It looks straight from a distance.
  • Chevron or V: the band dips to a point beneath the center stone. It suits pear, marquise, oval and heart shapes.
  • Shadow or traced: the band copies the outline of a halo or center stone, often lined with small diamonds, so the set reads as one design.
  • Wishbone: a softer, rounded dip that works with round, cushion and oval centers.

How to get the fit right

  1. Look at the side profile. Lay the engagement ring on its side and note where the setting drops below the band line. That is what the contour must clear.
  2. Measure the head. The width of the halo or basket at its lowest point tells you how wide the dip or notch must be.
  3. Match the ring size. Both rings should be the same size so the outlines line up when worn.
  4. Try them together. Check that the band does not press on prongs or diamonds. Metal pressing on a stone can loosen it over time.
  5. Match the metals. Rings that touch all day rub against each other. Choosing the same metal and karat keeps wear even and the color consistent.

Not sure whether your ring needs a contour band? Send us a photo of its side profile through our contact page and we can tell you which of our wedding bands will sit best with it.

Pros and cons

Pros Cons
Closes the gap so the set looks like one piece Made for one ring; may not suit a future upgrade
Protects the sides of a low setting The notch or dip can look empty worn alone
Stops the engagement ring from tipping Rings must be worn in a fixed order and position

Alternatives to consider

If you often wear your band alone, a slim straight band with a small gap may suit you better, and many people like the look of a little space. An open wedding band frames the center stone without needing an exact fit. Choosing the engagement ring and band together as a bridal set avoids the problem from the start.

Frequently asked questions

Can I wear a contour band on its own?

You can, but the notch or dip shows as an empty space without the engagement ring, so many people find it looks unfinished alone. If you will often wear the band by itself, a straight band may suit you better.

Does a contour band need to be made for my exact ring?

For a close fit, yes, or at least for a ring with the same setting height and head width. A band shaped for a different ring may leave gaps or press against the setting.

Should I solder my contour band to my engagement ring?

Soldering stops the rings from rubbing and twisting, but it makes resizing and cleaning more involved, and you can no longer wear either ring alone. Many people try wearing them unsoldered for a few months first.

Is a contour band the same as a ring enhancer?

Not quite. An enhancer, or ring wrap, usually hugs the engagement ring from both sides as two joined bands. A contour band is a single band worn on one side.

Put it into practice

Wedding bands to pair

Matched to your engagement ring and made new for you in about 2 to 2½ weeks.

Shop wedding bands

Still deciding? Ask the people who make it.

Amit, Shimi and Steven V. answer questions from our Fifth Avenue studio, by message or on a call.

Or follow along

Your bag (0)

Your bag is empty.

Start with a ring, then add the matching band and earrings.

Explore engagement rings