In this article
Quick answer
| What it is | Main driver | |
|---|---|---|
| Brilliance | White light reflected back to the eye | Refractive index and pavilion angles |
| Fire | Flashes of rainbow color | Dispersion and crown angles |
| Scintillation | Sparkle and light-dark pattern in motion | Facet size, layout and polish |
A lab-grown diamond has exactly the same optical properties as a natural one, so its light performance depends entirely on how well it is cut.
How a diamond handles light
Light entering a diamond slows down and bends sharply, because diamond's refractive index is 2.42, among the highest of any transparent gem. That strong bending gives diamond a small critical angle of about 24.4 degrees. Light that meets an inner facet at more than 24.4 degrees from straight on is reflected back inside instead of escaping. A well angled pavilion uses this total internal reflection to bounce light up and out through the top: that is brilliance.
On the way, white light splits into its colors, because each wavelength bends by a slightly different amount. Diamond's dispersion is 0.044, enough to throw visible flashes of red, orange and blue: that is fire. Scintillation comes from the facets acting as tiny mirrors that switch on and off as the stone, the light or your eye moves. A little darkness helps, since contrast between bright and dark facets makes the sparkle crisp.
What the cutter controls
- Pavilion angle. In a round brilliant, about 40.6 to 41 degrees keeps light inside. Too deep, and the center can look dark; too shallow, and light leaks out the bottom, sometimes leaving a gray ring called a fish-eye.
- Crown angle and height. A crown of roughly 34 to 35 degrees balances brilliance and fire. A taller crown favors fire; a flatter one favors brilliance.
- Table size. A larger table returns more white light but less color.
- Polish and symmetry. Crisp, well aligned facets give a sharper, more even sparkle.
More detail in our diamond cut guide. Step cuts such as emerald and Asscher work differently, trading busy sparkle for broad flashes; see step cut vs brilliant cut.
Lab-grown diamond vs other lab-made gems
| Lab-grown diamond | Moissanite | Cubic zirconia | |
|---|---|---|---|
| Refraction | Single, 2.42 | Double, higher than diamond | Single, lower than diamond |
| Fire | Balanced | Strong rainbow, over twice diamond's dispersion | Somewhat more than diamond |
| Hardness | 10 | 9.25 | About 8 to 8.5 |
| Over time | Unchanged | Stays bright | Scratches and can look cloudy |
Moissanite's double refraction can make facet edges look doubled when viewed through the crown. For a side-by-side look, read moissanite, cubic zirconia and lab-grown diamonds compared.
How to judge light performance
- Look in three lights: spot lighting shows fire and scintillation, daylight by a window shows brilliance and color, and dim evening light shows how lively the stone stays.
- Watch video, not stills. Sparkle only exists in motion.
- Use reflector images. ASET and ideal-scope images show where a stone leaks light, and a hearts and arrows viewer shows optical symmetry in rounds.
- For fancy shapes, use your eyes. Most labs give an overall cut grade only to round brilliants, so check ovals, pears and marquise cuts for a heavy bow tie.
Compare our ten shapes, each available as a lab-grown center with an IGI report, in engagement rings.
Frequently asked questions
Do lab-grown diamonds sparkle more than natural diamonds?
No. Their refractive index and dispersion are identical, so two diamonds cut to the same proportions sparkle the same. Any difference you see comes from cut quality, not origin.
Why does my diamond look less sparkly at home than in the store?
Stores use bright spot lights that bring out fire. Homes have softer, diffuse light. A film of skin oil and lotion also dulls sparkle, so regular cleaning makes a visible difference.
How should I clean a diamond to restore its sparkle?
Soak it in warm water with a drop of mild dish soap, scrub gently behind the stone with a soft toothbrush, rinse and dry with a lint-free cloth.
Which diamond shape has the most sparkle?
The round brilliant is engineered for maximum brilliance. Radiant and cushion cuts give lively, busy scintillation, while emerald and Asscher cuts show fewer, broader flashes.



