Skip to content

Did you know?

You can make us an offer.

The price on the page is not the only way to buy. Tell us what you would like to pay and the studio will reply by email.

  1. 1Choose your piece, metal and diamond.
  2. 2Tell us the price you have in mind.
  3. 3The studio reviews it and replies by email.

Up to 3 offers per piece. No payment details needed to send one.

Lab-grown and natural · Journal

The Carbon Footprint of a Lab-Grown Diamond vs a Mined Diamond

A lab-grown diamond's footprint depends mainly on the electricity used to grow it; a mined one's on earth moving and fuel. How to compare the two honestly.

By Steven V., Master Jeweler, 20+ YearsUpdated 2 min read

A polished diamond on a ledge in front of a blurred mine on one side and a clean laboratory on the other
In this article

Quick answer

Neither type has one fixed footprint. A lab-grown diamond's carbon footprint comes mainly from electricity, so it is low when grown on renewable power and much higher on a coal-heavy grid. A mined diamond's footprint comes from moving and processing large volumes of rock with diesel equipment and powered plants. Published per-carat figures vary widely, and several studies were funded by one side of the industry. The most useful question for either type is where the energy came from.

Where the emissions come from

Stage Lab-grown Mined
Main energy use Running reactors or presses for days to weeks Excavating, hauling and crushing ore
Main fuel Electricity from the grid or on-site renewables Diesel for trucks and generators, plus grid power
Land and waste A factory floor Open pits, waste rock and tailings
Cutting and polishing Similar for both Similar for both

Lab-grown diamonds

A CVD reactor keeps a plasma running for weeks to build a crystal layer by layer. An HPHT press holds extreme heat and pressure for days or weeks. Electricity is the dominant input either way. That makes location decisive: the same diamond grown on hydro or solar power can have a footprint many times smaller than one grown on a coal-heavy grid. The method itself is explained in how lab-grown diamonds are made.

Mined diamonds

Diamonds occur in tiny concentrations in kimberlite rock, so a mine moves and crushes a great deal of material for every carat recovered. Many mines are remote and run trucks, generators and processing plants on diesel. Some have added solar power or connected to cleaner grids, and many run land rehabilitation programs once a pit closes.

Why published numbers disagree

  • Different boundaries. Some studies count only the mine or factory; others include exploration, processing, offices and marketing.
  • Different energy assumptions. An average national grid gives a very different result from one specific grower's power contract.
  • Different units. Per rough carat and per polished carat are not the same, because cutting removes a large share of the weight.
  • Who paid. Studies have been commissioned by both mining groups and lab-grown producers. Read the method, not just the headline.

How to compare as a buyer

  1. Ask about the energy source. For lab-grown, ask where the diamond was grown and what powered it. For mined, ask whether the producer publishes emissions data.
  2. Look for independent verification. Third-party standards such as the SCS-007 sustainability rating audit origin, climate claims and practices.
  3. Read "carbon neutral" carefully. Neutral through purchased offsets is not the same as low emissions. Our guide to spotting greenwashing lists the warning signs.
  4. Count the metal too. Gold mining is energy-intensive, so the setting can be a meaningful share of a ring's footprint.
  5. Buy for life. A piece worn for decades spreads its footprint over a lifetime; one replaced after a few years does not.

Every Diamond Studio design is available with a lab-grown or natural diamond. Read more on our approach in sustainable diamonds.

Frequently asked questions

Are lab-grown diamonds carbon neutral?

Not automatically. Growing a diamond uses a lot of electricity. Some producers use renewable power, buy offsets or seek third-party ratings, so ask what any carbon-neutral claim is based on.

Is a recycled natural diamond a lower-carbon choice?

In carbon terms, yes. A diamond that was mined long ago and is reset adds no new mining emissions, only those of any recutting, setting and shipping.

Which type has more environmental impact beyond carbon?

Mining disturbs land, moves large volumes of rock and uses water, though many mines rehabilitate land. Lab-grown production has a small physical footprint; its energy demand is the main concern.

Does the size of the diamond change its footprint?

Yes. Larger rough takes longer to grow or more ore to recover, so a 3 carat stone carries more energy than a 1 carat stone of the same type and origin.

Put it into practice

Engagement rings to start from

Every design in any shape, metal and carat, with an IGI-certified lab-grown or GIA-certified natural diamond.

Shop engagement rings

Certification

Certified, every piece

Engagement rings come with an IGI or GIA certificate, and every other piece with a Diamond Studio certificate of authenticity.

Still deciding? Ask the people who make it.

Amit, Shimi and Steven V. answer questions from our Fifth Avenue studio, by message or on a call.

Or follow along

Your bag (0)

Your bag is empty.

Start with a ring, then add the matching band and earrings.

Explore engagement rings