Skip to content

Did you know?

You can make us an offer.

The price on the page is not the only way to buy. Tell us what you would like to pay and the studio will reply by email.

  1. 1Choose your piece, metal and diamond.
  2. 2Tell us the price you have in mind.
  3. 3The studio reviews it and replies by email.

Up to 3 offers per piece. No payment details needed to send one.

Diamond alternatives · Journal

Moissanite vs Cubic Zirconia: Sparkle, Durability and Value

Moissanite is harder, sparkles more and stays bright for decades. Cubic zirconia costs far less but scratches and can turn cloudy with daily wear.

By Steven V., Master Jeweler, 20+ YearsUpdated 2 min read

A moissanite flashing rainbow fire beside a glassier cubic zirconia on slate
In this article

Quick answer

Moissanite is the more durable and brilliant stone; cubic zirconia is the far cheaper one. Both are diamond simulants, but they are very different materials.

Moissanite Cubic zirconia
Material Silicon carbide Zirconium dioxide
Hardness (Mohs) 9.25 About 8 to 8.5
Refractive index About 2.65 About 2.15 to 2.18
Long-term look Stays bright with cleaning Scratches; can turn cloudy
Diamond tester Often passes a thermal tester Fails

Choose moissanite for a ring worn every day for years. Cubic zirconia suits fashion pieces, travel rings and short-term wear.

How they look

Moissanite bends light more than any other popular diamond look-alike, so it returns a lot of brightness and very strong rainbow fire, especially in sunlight. Cubic zirconia also shows colorful flashes, but with less brilliance, and it can look glassy beside moissanite or diamond. Cubic zirconia is usually perfectly colorless and flawless; moissanite is now mostly colorless too, though some stones show a faint warm or green tint (see moissanite colors).

One optical clue: moissanite is doubly refractive, so a loupe shows doubled facet edges through the side of the stone. Cubic zirconia is singly refractive and shows crisp single lines.

Durability and how they age

Hardness decides how a stone looks after years of wear. At 9.25, moissanite resists scratches from everyday contact and keeps sharp facet edges, and when it looks dull, a gentle cleaning brings it back; see does moissanite get cloudy.

Cubic zirconia, at about 8 to 8.5, is hard enough for occasional wear but wears faster in a daily ring. Its surface picks up fine scratches, the facet edges round off, and it can collect a film that makes it look cloudy over time. Many people who wear cubic zirconia every day replace the stone after a few years.

Weight and size

Cubic zirconia is much denser than moissanite and diamond. A cubic zirconia the same size as a 1 carat diamond, about 6.4 mm round, weighs noticeably more than a carat, while a moissanite of that size weighs a little less. Compare stones by millimeter size, not carat weight.

Which to choose

  • Moissanite suits a long-term ring or everyday earrings, where hardness and lasting sparkle matter.
  • Cubic zirconia suits costume jewelry, trend pieces, a placeholder ring while a custom piece is made, or a travel ring you would not mind losing.
  • A diamond is the choice if you want the material itself, at 10 on the Mohs scale, with a grading report. Lab-grown diamonds bring the cost of a real diamond down considerably.

For deeper comparisons, read moissanite vs lab-grown diamond, cubic zirconia vs diamond and our diamond alternatives guide. We make diamond jewelry only; if you would rather have a diamond, every design in our engagement rings is available with a lab-grown or natural center.

Frequently asked questions

Can you tell moissanite and cubic zirconia apart by eye?

Often, yes. Side by side, moissanite looks brighter and throws more intense rainbow flashes. Worn cubic zirconia also shows softer facet edges and surface scratches.

Is moissanite worth the higher price over cubic zirconia?

For a piece worn daily over many years, usually yes, because moissanite keeps its polish and sparkle far longer. For occasional or fashion jewelry, cubic zirconia is often enough.

Does cubic zirconia pass a diamond tester?

No. Cubic zirconia conducts heat poorly, so a standard thermal tester reads it as not diamond. Moissanite often passes a thermal tester and needs an electrical test to identify it.

Can a cubic zirconia stone be replaced with moissanite or diamond later?

Usually, if the setting is sound and the new stone has matching dimensions. A jeweler should measure the seat and check the prongs, since stones of the same carat weight can differ in size.

Put it into practice

Engagement rings to start from

Every design in any shape, metal and carat, with an IGI-certified lab-grown or GIA-certified natural diamond.

Shop engagement rings

Certification

Certified, every piece

Engagement rings come with an IGI or GIA certificate, and every other piece with a Diamond Studio certificate of authenticity.

Still deciding? Ask the people who make it.

Amit, Shimi and Steven V. answer questions from our Fifth Avenue studio, by message or on a call.

Or follow along

Your bag (0)

Your bag is empty.

Start with a ring, then add the matching band and earrings.

Explore engagement rings