Skip to content

Did you know?

You can make us an offer.

The price on the page is not the only way to buy. Tell us what you would like to pay and the studio will reply by email.

  1. 1Choose your piece, metal and diamond.
  2. 2Tell us the price you have in mind.
  3. 3The studio reviews it and replies by email.

Up to 3 offers per piece. No payment details needed to send one.

Lab-grown and natural · Journal

Do Lab-Grown Diamonds Have Inclusions? Growth Remnants Explained

Yes. Lab-grown diamonds can have inclusions, often metallic flux in HPHT stones and dark carbon specks in CVD stones. They are graded on the same clarity scale.

By Steven V., Master Jeweler, 20+ YearsUpdated 2 min read

Extreme macro of a loose diamond showing one tiny dark pinpoint inclusion inside, crisp facets
In this article

Quick answer

Yes. Lab-grown diamonds can have inclusions, just like mined diamonds. They form while the crystal grows, and the type depends on the growing method.

Method Typical inclusions
HPHT Metallic flux from the metal solvent, often dark and opaque; pinpoints
CVD Dark specks of non-diamond carbon, pinpoints, growth layers or strain

Lab-grown diamonds are graded on the same clarity scale, from Flawless to I3, so a VS1 or VVS2 lab stone looks just as clean to the eye as a natural one of the same grade.

Why lab-grown diamonds have inclusions

A diamond grows atom by atom, whether in the earth or in a lab. Anything that disturbs that growth, such as a foreign particle, a change in temperature or a speck of carbon that does not crystallize as diamond, can be trapped inside. Growers work hard to control conditions, which is why many lab-grown diamonds reach high clarity grades, but a perfectly clean crystal is never certain.

Inclusions by growing method

HPHT diamonds

High pressure, high temperature growth dissolves carbon in molten metal, usually iron, nickel or cobalt, which then crystallizes onto a seed. Tiny drops of that metal can be trapped as metallic flux inclusions. They look dark or silvery and can be needle-like, rounded or irregular. Larger ones can make a stone weakly attracted to a strong magnet, something a natural diamond is not.

CVD diamonds

Chemical vapor deposition builds a diamond layer by layer from a carbon-rich gas. Particles of carbon that do not form diamond can be trapped as dark pinpoints or specks. Because growth happens in layers, some CVD stones also show banded strain under polarized light, which can sometimes give a slight grey or brown cast. Our guide to CVD vs HPHT lab diamonds covers both methods.

Natural diamonds, for comparison

Mined diamonds often contain tiny crystals of other minerals, such as garnet, olivine or even another diamond, plus feathers, needles and clouds. These help gemologists confirm natural origin, but they are not a home test. Telling lab-grown from natural reliably takes laboratory equipment.

How clarity is graded

IGI grades lab-grown diamonds on the full scale: FL, IF, VVS1, VVS2, VS1, VS2, SI1, SI2, I1, I2 and I3. Since 2025, GIA describes lab-grown diamonds as "premium" or "standard" instead of giving the full clarity grade. The grade reflects the size, number, position and visibility of inclusions at 10x magnification, not how the diamond was made. Read more in our diamond clarity chart and diamond inclusions guide.

What to check before you buy

  • The plot on the report. An IGI report maps the main inclusions. A dark flux inclusion under the table matters more than a pinpoint near the edge.
  • Color tone. In CVD stones, ask whether there is any grey or brown tint from strain.
  • Eye-clean in person or on video. At VS1 and above, inclusions are very hard to see without magnification.
  • Durability. A large feather reaching the surface can weaken a stone in either type of diamond.

Diamond Studio's lab-grown engagement ring centers come with an IGI report and are offered in VS1, VVS2 and VVS1 clarity. Browse engagement rings, or see how to read an IGI report.

Frequently asked questions

Are lab-grown diamonds more included than natural diamonds?

Not as a rule. Many lab-grown diamonds reach VS and VVS clarity, but grade for grade they are no cleaner or dirtier than natural diamonds. The clarity grade tells you how included a given stone is.

Can inclusions show that a diamond is lab-grown?

Sometimes. Metallic flux points strongly to HPHT growth, but many lab-grown stones have no telling inclusions at all. Labs confirm origin with spectroscopy and fluorescence imaging, not by eye.

Do inclusions make a lab-grown diamond weaker?

Most do not. Small pinpoints and specks have no effect on durability. Large feathers or cracks that reach the surface can weaken any diamond, so check the report plot for them.

Is a VVS lab-grown diamond worth it over VS1?

Both look clean to the naked eye. VVS grades suit buyers who value near-perfection under magnification; VS1 gives the same look face-up for less. Choose by priorities, not appearance.

Put it into practice

Engagement rings to start from

Every design in any shape, metal and carat, with an IGI-certified lab-grown or GIA-certified natural diamond.

Shop engagement rings

Certification

Certified, every piece

Engagement rings come with an IGI or GIA certificate, and every other piece with a Diamond Studio certificate of authenticity.

Still deciding? Ask the people who make it.

Amit, Shimi and Steven V. answer questions from our Fifth Avenue studio, by message or on a call.

Or follow along

Your bag (0)

Your bag is empty.

Start with a ring, then add the matching band and earrings.

Explore engagement rings