In this article
Quick answer
| Term | Stands for | What it measures |
|---|---|---|
| CT | Carat | The weight of one diamond (1 ct = 0.2 g) |
| CTW or CT TW | Carat total weight | All the diamonds in the piece combined |
| CTTW | Carat total weight | Same as CTW |
| TW, TCW, TDW | Total weight, total carat weight, total diamond weight | Same as CTW |
CTW, CTTW and TW are different spellings of one idea. Only CT refers to a single stone. A pair of 1 ctw studs holds two diamonds of about 0.50 ct each, not two 1-carat diamonds.
Total weight causes a lot of confusion on jewelry listings, because it describes the whole piece rather than any one diamond. For carat weight itself, see the diamond carat guide.
What total weight looks like on real pieces
The same total can be split many ways, and the split decides how big each diamond looks. The diameters below are approximate, for well-cut round diamonds.
| Piece and listed weight | A typical split | Size of each diamond |
|---|---|---|
| Stud earrings, 1 ctw | Two 0.50 ct diamonds | About 5.1 mm |
| Stud earrings, 2 ctw | Two 1.00 ct diamonds | About 6.4 mm |
| Three-stone ring, 2 ctw | 1.00 ct center and two 0.50 ct sides | 6.4 mm center, 5.1 mm sides |
| Halo ring, 1.50 ctw | 1.00 ct center plus 0.50 ct of small halo and band diamonds | 6.4 mm center |
| Eternity band, 2 ctw | Twenty 0.10 ct diamonds | Small accents |
The halo example shows why the center weight matters most on an engagement ring. A 1.50 ct solitaire has a center about 7.3 mm across. A halo ring listed at 1.50 ctw has a 6.4 mm center, even though the halo makes the top of the ring look larger overall. The mm to carat conversion chart covers more sizes.
Why total weight is not a price shortcut
Price per carat rises with the size of each stone, because large rough is much scarcer than small rough. One 1-carat diamond costs far more than 1 ctw made of ten 0.10 ct stones, even at the same color and clarity. Two pieces with the same total weight can sit at very different prices, and a low price on a high ctw figure usually means many small stones.
Grading differs too. A center diamond is often sold with its own grading report. Small accent diamonds, called melee, are usually sorted and described in batches, by a range of color and clarity rather than one exact grade. Compare the center diamond's weight and grades first, then look at the accents.
How to read a jewelry listing
- Find the center weight on its own. A clear listing gives both, for example 1.50 ct center and 1.85 ctw.
- Ask for the exact decimal weight. Fractions such as 1/2 or 3/4 ctw are often rounded, so two pieces with the same fraction can differ slightly.
- Check per stone or per pair. Earring weights are usually the total for the pair.
- Match the report. The weight on a grading report should match the weight in the listing.
- Do not confuse carat with karat. Karat (K) measures gold purity: 14K is 58.3% gold and 18K is 75%. It has nothing to do with diamond weight.
Carat weight at Diamond Studio
An engagement ring's center diamond is offered lab-grown from 1 to 8 carats with an IGI report, or natural from 1 to 3 carats with a GIA report, and that report states the stone's exact weight. Wedding bands, fashion bands, earrings, necklaces and bracelets come with a Diamond Studio certificate of authenticity, and our studio grades their diamonds to GIA standards. Browse earrings or engagement rings, and send us a message if any weight is unclear.
Frequently asked questions
Is 1 ctw the same as 1 carat?
Only when the piece holds a single diamond. On jewelry with several stones, 1 ctw is the combined weight, so each diamond weighs less than 1 carat and looks smaller as well.
How many grams is one carat?
One carat is 0.2 grams, or 200 milligrams. It is divided into 100 points, so a 0.75 ct diamond is often called a 75-pointer.
Does carat weight tell you how big a diamond looks?
Only roughly. Cut proportions and shape change the face-up size. A deep stone hides weight underneath, and elongated shapes such as oval, marquise and pear look larger from above than a round of the same weight.
What does DEW mean on a jewelry tag?
DEW means diamond equivalent weight. It is used for simulants such as moissanite and cubic zirconia and gives the weight a diamond of the same size would have. It is not an actual diamond weight.
Can a solitaire ring be listed in ctw?
Yes. If the ring has a single diamond on a plain band, the center weight and the total weight are the same. If it has any accent diamonds, ask for the center weight separately.



