In this article
Quick answer
Moissanite usually passes a basic thermal diamond tester, because it conducts heat almost as well as diamond. It usually fails an electrical tester: moissanite conducts a small electric current, while nearly all diamonds do not. That is why jewelers use a multi-tester that runs both checks.
- Thermal tester only: moissanite often reads as diamond
- Electrical or multi-tester: moissanite reads as moissanite
- Gem lab: identifies it with certainty
How diamond testers work
A thermal tester touches a heated tip to the stone and measures how fast heat flows away. Diamond moves heat faster than any other gem, so cubic zirconia, glass, white sapphire and topaz all fail. Moissanite, though, is also an excellent heat conductor, so a thermal-only tester often beeps diamond.
An electrical tester, often called a moissanite tester, checks whether a small current passes through the stone. Moissanite is a semiconductor and conducts; diamond is an insulator. A multi-tester combines both readings and is the standard tool at a jewelry counter.
| Stone | Thermal tester | Electrical tester |
|---|---|---|
| Natural diamond | Diamond | Diamond (does not conduct) |
| Lab-grown diamond | Diamond | Usually diamond; see the caution below |
| Moissanite | Often diamond | Moissanite (conducts) |
| Cubic zirconia, glass, sapphire, topaz | Not diamond | Not relevant |
Where testers get it wrong
- Boron-containing diamonds. Some lab-grown diamonds, mostly HPHT stones with traces of boron, conduct electricity and can trigger a moissanite reading. Rare natural blue diamonds do the same. See the boron blue tint in HPHT diamonds.
- Touching metal. If the tip touches a prong, the metal conducts and the tester can show a false moissanite result.
- Dirty or cold stones. Oil, lotion or a stone fresh from the cold changes how heat moves. Clean and dry the stone, and let it reach room temperature.
- Small stones. Tiny accent diamonds are hard to test accurately; hold the tip square to the facet with steady, light pressure.
- Weak batteries or uncalibrated devices. Many testers include a check plate; use it first.
Other ways to tell moissanite from diamond
Moissanite is doubly refractive, so a loupe aimed through the side of the crown shows doubled back facet edges; diamond shows single, sharp lines. Moissanite also throws stronger rainbow fire, especially in sunlight, and is slightly lighter, so a loose stone of the same size weighs a little less. For more checks, read how to tell if a diamond is real.
Testers cannot tell lab-grown from natural
Lab-grown diamonds are real diamonds, so they pass thermal and usually electrical testers, as mined ones do; see do lab-grown diamonds pass a diamond tester. Separating lab-grown from natural takes specialist screening equipment or a gem lab. The surest proof is a grading report matched to the stone, explained in our diamond certification guide. Every center diamond in our engagement rings comes with an IGI report (lab-grown) or a GIA report (natural).
Frequently asked questions
Can a jeweler tell moissanite from diamond without a tester?
Often, yes. An experienced jeweler with a loupe looks for doubled facet edges and the stronger rainbow fire typical of moissanite. A multi-tester or lab test confirms it.
Are home diamond testers reliable?
A quality multi-tester is a useful screening tool, but readings can be thrown off by metal contact, dirt or boron-containing diamonds. Treat a surprising result as a reason for a professional check.
Will moissanite pass a pen-style diamond tester?
Most pen-style testers are thermal only, so moissanite will often read as diamond. Check whether the device lists moissanite detection before relying on it.
Does a diamond tester damage the stone?
No. The tip touches the surface with gentle heat or a tiny current, which does not harm diamond or moissanite.



