In this article
Quick answer
Yes. A lab-grown diamond passes a standard diamond tester because it is diamond: it conducts heat exactly like a natural one, which is what thermal testers measure. That also means a basic tester cannot tell you whether a diamond is lab-grown or natural.
- Thermal testers read lab-grown and natural diamonds as diamond.
- Multi-testers add an electrical check to separate diamond from moissanite. Some HPHT lab-grown stones contain boron, conduct electricity and can be flagged as moissanite by mistake.
To know what you have, rely on the grading report and its matching laser inscription.
How diamond testers work
Testers do not look at a diamond the way a gemologist does. They measure one physical property and compare it with what diamond should show. Each type answers a different question:
| Tester | What it measures | What it tells you | What it cannot tell you |
|---|---|---|---|
| Thermal tester | How fast the stone draws heat from a heated tip | Diamond or not, for most simulants | Moissanite vs diamond; lab-grown vs natural |
| Multi-tester | Heat plus electrical conductivity | Diamond vs moissanite | Lab-grown vs natural; some boron-containing stones mislead it |
| Lab-grown screening device | How the stone absorbs or glows under ultraviolet light | Natural, or refer for further testing | Grades; the growth method |
| Gem lab instruments | Spectroscopy and fluorescence imaging | Origin, growth method, treatment | Nothing a shopper needs; this is what a report is based on |
Diamond moves heat away faster than almost any other material, so glass, cubic zirconia and white sapphire fail a thermal test. Moissanite conducts heat almost as well as diamond, which is why multi-testers add an electrical check: moissanite conducts electricity and colorless diamond normally does not.
So is there a tester that spots lab-grown diamonds? Not a handheld one in the usual sense. Screening devices rely on chemistry: many natural diamonds contain nitrogen, which absorbs short-wave ultraviolet light, while lab-grown diamonds are usually almost free of it. A stone that shows the nitrogen signature passes as natural. Anything else, including some rare natural diamonds that also lack nitrogen, is referred for laboratory testing. The device narrows the question; a gem lab answers it.
How common stones read
| Stone | Thermal tester | Multi-tester |
|---|---|---|
| Natural diamond | Diamond | Diamond |
| Lab-grown diamond, CVD | Diamond | Diamond |
| Lab-grown diamond, HPHT | Diamond | Usually diamond; some boron-containing stones read as moissanite |
| Moissanite | Usually reads as diamond | Moissanite |
| White sapphire | Not diamond | Not diamond |
| Cubic zirconia | Not diamond | Not diamond |
| Glass | Not diamond | Not diamond |
The HPHT exception matters if you own a lab-grown diamond: a moissanite alert on a stone with an IGI report does not mean it was swapped. Boron traces make some HPHT stones electrically conductive, and the same is true of rare natural blue diamonds. A gem lab or a jeweler with screening equipment can confirm it. For a side-by-side of the two materials, see moissanite vs lab-grown diamond.
Using a tester correctly
Many false results come from technique, not from the stone:
- Clean and dry the stone first. Oil, lotion and dust insulate the surface and slow heat transfer.
- Let it reach room temperature. A stone that has just been worn or held is warm and can read low.
- Touch the probe to a facet, not the metal. Hold the tip at a right angle to the table facet. Touching a prong or the setting triggers a metal alert.
- Follow the tester's contact rules. Some models need you to hold a metal plate or the ring's metal to complete the circuit.
- Check the battery and calibration. A weak battery is a common cause of a real diamond failing.
- Be careful with very small stones. Melee and accent diamonds are hard to test reliably with a standard tip.
Home tests that do not work
Several popular tricks give misleading results:
- The fog test. Breathing on the stone and timing how fast the fog clears. Moissanite clears quickly too, and a dirty diamond can hold fog.
- The water test. Dropping a loose stone in water to see if it sinks. Diamond, moissanite, cubic zirconia and sapphire all sink.
- The read-through test. Trying to read print through the stone. It depends on the cut and does not work for set stones or many fancy shapes.
- The scratch test. Scratching glass or scraping the stone. It can chip a diamond along its cleavage planes and proves little.
- The UV test. Many diamonds glow blue under ultraviolet light, but many do not, and some simulants glow too.
Our guide on how to tell if a diamond is real covers the checks a jeweler uses.
The reliable proof: report and inscription
A tester can rule out obvious simulants, but it cannot grade a diamond or tell you its origin. For anything you are buying, insuring or inheriting, rely on an independent report and the laser inscription that links the report to the stone. Check the report number on the girdle with a 10x loupe, then verify it on the lab's website; our diamond certification guide shows how. The laser inscription guide explains what the numbers mean.
Every Diamond Studio engagement ring comes with an IGI report for a lab-grown center or a GIA report for a natural one. Our other pieces come with a Diamond Studio certificate of authenticity, with diamonds graded by our studio to GIA standards. If a tester ever gives you a surprising result on one of our pieces, send us a message and we will help you check it.
Frequently asked questions
Can a jeweler tell if my diamond is lab-grown?
Not with a loupe or a standard tester. It takes screening equipment or a gem lab, which reads growth patterns and trace elements. The grading report states the origin.
Does moissanite pass a diamond tester?
It passes many thermal testers, because it conducts heat almost as well as diamond. Multi-testers that also measure electrical conductivity identify it as moissanite.
Does cubic zirconia pass a diamond tester?
No. Cubic zirconia does not conduct heat like diamond, so it fails a thermal tester. White sapphire and glass fail too.
Why did my real diamond fail a tester?
Usually technique: a dirty or warm stone, touching the metal, a weak battery or a very small stone. Clean it, let it cool, retest carefully, and ask a jeweler if the result still looks wrong.
Are home diamond testers accurate?
They are useful for ruling out common simulants when used correctly. They cannot grade a diamond, confirm a lab-grown or natural origin, or replace an independent report.



